(+84) 905 361 004

Máy Xăm khí CO

SPECIFICATION

MACHINE NAME: AUTO GAS INJECTION MACHINE – AG03

POWER SUPPLY: 1 PHASE, 100 – 220VAC, 50-60 HZ, 750W

CONVEYOR BELT TYPE: food grade, flat plastic conveyor.

NO.: BENCHMARKS AUTO GAS INJECTION MACHINE NOTE
1 CAPACITY max 3,400kg/h
2 CO GAS CONSUMPTION 2-5 TONS/CLY (V40L,150BAR)
3 GAS INJECT PRESSURE 40-45 PSI
4 OPERATE MODES MANUAL/AUTO
5 CLEANING SYSTEM Auto conveyor cleaning as required
Auto needles cleaning as required
6 STERILIZER UVC
7 ERRORS ALARM (Alarm by light/sound/array text) Low/High gas injection pressure
Fish over height alarm
Needles broken/bent alarm
Needles touching conveyor alarm.
8 WARNING Overload motors,
Sensor errors
Limited switch errors.
9 NEEDLES Quantity: Standard 384 needles
Dimension: OD: 1.0-2.0mm x L210mm depending on products inject
Material: Stainless steel
Needles tip: Anti-clog tip
Flow rate: for gas or brine
10 MOVEMENT Servo motor (750W)
11 DIMENSION L2350 x W1050 x H1880mm
12 POWER 1 PHASE, 100-220VAC, 50/60Hz – 750W

 

A – INTRODUCTION

SPECIFICATION:

Parts and spare part: Industrial use such as PLC controller, HMI touch screen, Servo motor, Electric wares from Schneider, Omron, LS, Stainless bearing from Asahi-Japan, plastic conveyor from US (Food grade)…

NO. – EQUIPMENT – SPECIFICATIONS
1 GAS INJECTION MACHINE

GENERAL FEATURES
Construction material Stainless steel, Teflon…
Dimension: L x W x H (2350 x 1050 x 1880)mm
Visualization of parameters adjustment variable Resistor, HMI LCD
Power 750W
Power supply 01 phase – 100-220VAC/750W 50-60 Hz
Weight 250-350 kg
Motor: 2 motors for driving a conveyor and a injector module Servo motor with gear.
UVC Sterilized lamp (injector chamber sterilized) YES
Manifold needles: 384 holes
PERFORMANCES
Allowed room temperature Range from 5 – 40 °C
Independent adjusting the speed of the injector module (down and up speed can be difference, to protect needles) YES
Adjustable stroke range of conveyor module (Overlapping inject) YES (0 – 200)mm
Adjustable on gassing(to avoid needles clog) YES
Low/High gas pressure alarm YES (LCD text array/sounder/light sign)
Adjustable on working pressure depending on gas needles flow. YES (physically adjustments)
Needles broken/bent auto alarm. YES (LCD text array/sounder/light sign)
Needles protection (alarm when needles touch conveyor) YES (LCD text array/sounder/light sign)
Servo motors protection (injector, conveyor) YES (LCD text array/sounder/light sign)
Rate (kg/hour) hour for gas injects Max 3,400 kg of loin.
Gas Consumptions (kg/cylinder) (1,500-5,000) kg of loin per cylinder

 

Our machines are equipped with new features that make injecting fish more efficient. In addition to the basic features such as: warning fish over high levels, low pressure warning … our machines also have advanced features such as:
+ To avoid needles clog: YES
+ Adjustable on gassing time: YES
+ Stainless steel manifold: YES
+ Independent adjustable on speed of injector: YES – independent adjustment of speed of down or up of injector needles.
+ Needles protection: YES – Avoid needles clogging, bent, broken.
+ Fish protection: YES – Avoid meat cracking, no brown spots after treatment.
+ Reasonable design & easy to operate and high safety: YES
+ The machine is designed for high-intensity work purposes with very efficiency, good performance and durability…
+ Compact design: L2350mm x W1050mm x H1880mm, save much space for your processing room.
+ Easy to install: just connect with CO/TS/Oxygen gas supply, power 100-220V-50/60Hz – 750W, and open air ventilation fan, and your machine is ready to play!
+ Saving power and sanitary: No need hydraulic source, no need air compressor to operate hydraulics piston/pneumatic piston for the injector module such as old and other versions. Our machine uses a direct electric source with just 750 Walt, saving much power to the operator as well as sanitary for.
+ Friendly to operate: all parameters can be adjusted by HMI screen or physical volume button. All warm and alarm can read clearly on the HMI screen with sound and lighter. The operators can follow instruction and adjust by themselves.
+ Food grade material & design: All material made from the food grade standard such as stainless steel, Teflon and flat plastic conveyor.
+ Easy to clean: Easy to clean the system before and after operating the system. Especially flat conveyors are very easy to clean, easy to take out and roll-up and soaking into chlorine water after use.
+ Movable: with 4 or 6 caster, the machine easy to move to installation area,
+ Design more safety: With separation between electric wares with gas line system, all gas lines are installed in an injector chamber with air ventilation system. It is safer during operation and safer when having problems with leaking on the hose…

ILLUSTRATION PHOTOS

GAS & BRINE INJECTION MACHINE:

Máy Xăm khí CO - BNT Machinery

Máy Xăm khí CO - BNT Machinery

Máy Xăm khí CO - BNT Machinery

Máy Xăm khí CO - BNT Machinery

Máy Xăm khí CO - BNT Machinery

Máy Xăm khí CO - BNT Machinery

Máy Xăm khí CO - BNT Machinery

BNT Machinery

Địa chỉ: Số 233, 23/10 Phường Phương Sơn, Thành phố Nha Trang, Khánh Hòa

Hotline & Zalo & Whatsapp: (+84) 905 361 004

Email: bntbaonam@gmail.com

Web: https://bntmc.vn


Updating….

BNT Machinery

Địa chỉ: Số 233, 23/10 Phường Phương Sơn, Thành phố Nha Trang, Khánh Hòa

Hotline & Zalo & Whatsapp: (+84) 905 361 004

Email: bntbaonam@gmail.com

Web: https://bntmc.vn

Contact Info

    X